在大多數情況下，可以通過檢查受損軸的泰州INA軸承來發現可能的原因。一般而言，單向軸承損壞的三分之一是由疲勞損傷引起的，三分之一是由于潤滑**良，三分之一是由于軸承或設備上的污染物的不當處理。

In most cases, the probable cause can be found by examining the Taizhou bearing of damaged shaft INA. Generally speaking, one third of unidirectional bearing damage is caused by fatigue damage, one third is due to good lubrication, and one third is due to improper treatment of pollutants on bearings or equipment.

然而，這些損害模式也與工業類別有關。例如，紙漿和造紙工業主要是由于潤滑**良或軸承損壞造成的污染，而不是材料疲勞。

However, these damage patterns are also related to industrial categories. For example, the pulp and paper industry is mainly due to pollution caused by good lubrication or bearing damage, rather than material fatigue.

所謂軸承燒壞狀態是指滾道、滾動元件和泰州INA軸承保持架在旋轉過程中急劇加熱直至變色、**、沉積和損壞。

The so-called bearing burnout state refers to the raceway, rolling elements and Taizhou INA bearing cage heated sharply until discoloration, deposition and damage during rotation.

看到這一點，我想每個人都想知道解決辦法。首先要研究潤滑油和潤滑方法，選擇進口軸承潤滑油及其用量，選擇合適的軸承。研究匹配、軸承間隙和預壓，并改進密封裝置。檢查軸箱和軸承箱的精度。當然，如果你身邊有專家，讓他從你身上學到**好的東西。

Seeing this, I think everyone wants to know the solution. First of all, we should study the lubricating oil and lubricating methods, select the imported bearing lubricating oil and its dosage, and select the appropriate bearing. Study matching, bearing clearance and preloading, and improve sealing device. Check the accuracy of axle box and bearing box. Of course, if you have experts around you, let him learn something good from you.

1。軸承維護：為了盡可能長時間地保持泰州INA軸承的原始性能，**須進行維護和事故預防，以確保運行的可靠性，提高生產率和經濟性。

1. Bearing Maintenance: In order to maintain the original performance of Taizhou INA bearing for as long as possible, ** maintenance and accident prevention must be carried out to ensure the reliability of operation and improve productivity and economy.

保持相應的機械操作條件的**佳操作標準并定期執行。內容包括監測操作狀態、補充或更換潤滑劑、定期拆卸和檢查。運行維護項目包括旋轉聲、振動、溫度、單向軸承潤滑狀態等。

Maintain appropriate operating standards for mechanical operation conditions and perform them regularly. The contents include monitoring operation status, replenishment or replacement of lubricants, regular disassembly and inspection. Operation and maintenance items include rotary sound, vibration, temperature, lubrication status of unidirectional bearing, etc.

2。軸承維護：軸承清洗：拆卸軸承時，先記錄軸承的外觀，確認潤滑油殘留，取樣后對軸承進行檢查清洗。汽油和煤油通常用作洗滌劑。

2. Bearing maintenance: bearing cleaning: when disassembling the bearing, first record the appearance of the bearing, confirm the residual lubricant, and then check and clean the bearing after sampling. Gasoline and kerosene are commonly used as detergents.

拆卸軸承清洗、粗清洗和精清洗，分別在容器中，首先放置在金屬網的底部，使軸承不直接接觸容器中的污垢。在粗清洗過程中，如果泰州INA軸承因污垢而旋轉，則會損壞軸承的滾動表面。在原油清洗中，用刷子清*除油脂和膠粘劑。清洗后，轉為精洗。

Remove bearing cleaning, rough cleaning and fine cleaning, respectively, in the container, first placed at the bottom of the metal mesh, so that the bearing does not directly contact the dirt in the container. In rough cleaning process, if Taizhou INA bearing rotates due to dirt, it will damage the rolling surface of the bearing. In crude oil cleaning, use grease to remove grease and adhesives. After cleaning, turn to fine wash.

精細清洗是在清洗油時逐一清洗進口軸承。此外，清潔油也應保持清潔。

Fine cleaning is to clean the imported bearings one by one while cleaning the oil. In addition, clean oil should also be kept clean.

3。軸承的維護與判斷：為了判斷拆卸后的軸承是否可以使用，清洗后檢查進口軸承。檢查滾道表面、滾動面和配合面的狀態，保持架磨損，單向軸承間隙增大，尺寸精度降低。然后用手把不可分離球泰州INA軸承支承在內圈的水平面上，并轉動外圈以確定其平滑度。

3. Maintenance and judgment of bearings: In order to judge whether the bearings after disassembly can be used, check the imported bearings after cleaning. Check the state of raceway surface, rolling surface and mating surface, cage wear, one-way bearing clearance increases, dimension accuracy decreases. Then the inseparable ball Taizhou INA bearing is supported on the horizontal surface of the inner ring by hand, and the outer ring is rotated to determine its smoothness.

文章來自：泰州SKF軸承 www.wh-skf.com

The article is from: Taizhou SKF bearing www.wh-skf.com

文章來自：泰州INA軸承 www.ina-china.cn

The article is from: Taizhou INA bearing www.ina-china.cn

文章來自：泰州NSK軸承 www.klbbearings.com

The article is from: Taizhou NSK bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757